transcript: Hello, in this tutorial I show you how to
make a simple and original bracelet with name material ruler, marker, thick plastic, you can use acetate 2 colors of thread, I will use hemp thread, scissors, 1 thin object with flat tip,
I will use this brooch with flat tips and the craftingeek downloadable templates take the plastic and trace a strip of 1 x 10 cm in this space will fit about 9 letters cut the strip you should have something like this take the thread of the color you want your letters measure and cut 6 strips of 30 cm take all strips by edges and fold in half put the threads in the center of the plastic strip and arrange for not overlap take another color thread, this thread will be the mobile thread drop a part of thread during the process to avoid tangling leave aside and accommodate like this take the tip and put it behind the plastic diagonally hold up the threads from front and back the thumb will hold the 6 threads and
with the index hold the mobile thread move the movil thread to entangle in the plastic as close possible as the edge together and without clumping watch the other threads, it have to stay in you hands so you understand the technique better do the same name as me "Elizabeth" take the scripts guide and start with the "e" each of the vertical lines are the turns that we do with the
movil threads, and each horizontal line represents each thread of the base to make the "e" letter you need to
do 2 turns with the movil threads take the threads and put them on the left side with the mobile thread do 2 turns lets go back to the guide, we need to make the other part of
the letter, we just let the threads number1, 3, 4 and 6 so returns the threads number 2 and 5 to the plastic base hold up them well and do 2 turns with the movil thread you already have the "e", if you return all
the threads you will see an "e" return all threads to the plastic base arrange them to not overlap between each letter there is a gap of 3 laps with movil thread to do the "L" drop all the threads and do 2 turns with
the movil thread and then leave out the threads 5 and 6 remove all threads and do 2 turns with the mobile thread return all threads except but the last two threads do 4 turns with the mobile thread return the threads to the plastic base and you will have the "L" do the separation laps to do the "I" are 2 turns with mobile thread removing all threads do 2 with the mobile thread then return the threads to form the letter do the separation laps for the "Z" in the first round, take
out the threads 1, 5 and 6 remove them from the base and do 2 turns with mobile thread for the next round take out the threads 1, 4 and 6 so return the number 5 and take the 4 do just one turn with mobile thread Now take the thread number 3 and 4 and do 1 turn with the mobile thread take out the threads 1, 2 and 6 and do 2 turns with mobile thread return all the threads and do the separation laps to do the "A" do 2 turns with all threads, 2
turns with these here and again 2 laps with all threads remove all threads and do 2 turns with the mobile thread return the threads 3, 5 and 6, do 2 turns,
remove all threads and do another 2 turns do the separation laps do the same with all the letters remember to accommodate the threads between each letter to don´t overlap when you finish do 8 turns as the begining when you finish, move the mobile thread behind the bracelet and cut,
it doesn´t have to be too short neither too long flip the bracelet and put it vertically in front of you put the excess thread under the other threads take the flat object and insert the thread when you finish cut the excess of the plastic move the threads and cut the excess, as close as possible to the edge do the same on the other side, if you
have excess on the other side, cut if you think that the plastic is very pointed, burn the edges and you´re done to put it on, just tie both sides of thread remember that in a strip of 10 cm fit
you can have 9 or 10 letters ready you finished I hope you enjoyed this tutorial remember to subscribe and share this video with your friends craftingeek more at www.craftingeek.me do 8 turns with the mobile thread
About
We publish the transcription of a YouTube video. This is useful for: search, language learning.